Buljak Vladimir, Bruno Giovanni (2018). Numerical modeling of thermally induced microcracking in porous ceramics: An approach using cohesive elements, Journal of The European Ceramic Society, 38(11), 4099-4108.
Elsevier Sci Ltd, Oxford, ISSN: 0955-2219, 10.1016/j.jeurceramsoc.2018.03.041, M21a+.

Buljak Vladimir, Baivier-Romero Severine, Kallel Achraf (2021). Calibration of Drucker-Prager Cap Constitutive Model for Ceramic Powder Compaction through Inverse Analysis, Materials, 14(14).
MDPI, Basel, ISSN: 1996-1944, 10.3390/ma14144044, M21a.

Buljak Vladimir, Cocchetti Giuseppe, Cornaggia Aram, Maier Giulio (2017). Estimation of residual stresses by inverse analysis based on experimental data from sample removal for "small punch" tests, Engineering Structures, 136, 77-86.
Elsevier Sci Ltd, Oxford, ISSN: 0141-0296, 10.1016/j.engstruct.2016.12.062, M21a.

Bolzon Gabriella, Buljak Vladimir (2011). An effective computational tool for parametric studies and identification problems in materials mechanics, Computational Mechanics, 48(6), 675-687.
Springer, New York, ISSN: 0178-7675, 10.1007/s00466-011-0611-8, M21a.

Buljak Vladimir, Oesch Tyler, Bruno Giovanni (2019). Simulating Fiber-Reinforced Concrete Mechanical Performance Using CT-Based Fiber Orientation Data, Materials, 12(5).
MDPI, Basel, ISSN: 1996-1944, 10.3390/ma12050717, M21.

Buljak Vladimir, Cocchetti Giuseppe, Cornaggia Aram, Maier Giulio (2018). Parameter identification in elastoplastic material models by Small Punch Tests and inverse analysis with model reduction, Meccanica, 53(15), 3815-3829.
Springer, Dordrecht, ISSN: 0025-6455, 10.1007/s11012-018-0914-3, M21.

Bocciarelli M., Buljak Vladimir, Moy C. K. S., Ringer S. P., Ranzi G. (2014). An inverse analysis approach based on a POD direct model for the mechanical characterization of metallic materials, Computational Materials Science, 95, 302-308.
Elsevier, Amsterdam, ISSN: 0927-0256, 10.1016/j.commatsci.2014.07.025, M21.

Buljak Vladimir, Bocciarelli M., Maier Giulio (2014). Mechanical characterization of anisotropic elasto-plastic materials by indentation curves only, Meccanica, 49(7), 1587-1599.
Kluwer Academic Publishers, ISSN: 0025-6455, 10.1007/s11012-014-9940-y, M21.

Buljak Vladimir, Cocchetti Giuseppe, Maier Giulio (2013). Calibration of brittle fracture models by sharp indenters and inverse analysis, International Journal of Fracture, 184(1-2), 123-136.
Springer, Dordrecht, ISSN: 0376-9429, 10.1007/s10704-013-9841-4, M21.

Buljak Vladimir, Maier Giulio (2012). Identification of residual stresses by instrumented elliptical indentation and inverse analysis, Mechanics Research Communications, 41, 21-29.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0093-6413, 10.1016/j.mechrescom.2012.02.002, M21.

Obradović Nina, Fahrenholtz William G., Filipović Suzana, Corlett Cole, Đorđević Pavle, Rogan Jelena, Vulić Predrag J., Buljak Vladimir, Pavlović Vladimir B. (2019). Characterization of MgAl2O4 Sintered Ceramics, Science of Sintering, 51(4), 363-376.
Međunarodni Institut za nauku o sinterovanju, Beograd, ISSN: 0350-820X, 10.2298/SOS1904363O, M22.

Pandey Shwetank, Buljak Vladimir, Balać Igor (2017). Reduced Order Numerical Modeling for Calibration of Complex Constitutive Models in Powder Pressing Simulations, Science of Sintering, 49(3), 331-345.
Međunarodni Institut za nauku o sinterovanju, Beograd, ISSN: 0350-820X, 10.2298/SOS1703331P, M22.

Buljak Vladimir, Cocchetti Giuseppe, Cornaggia Aram, Maier Giulio (2015). Assessment of residual stresses and mechanical characterization of materials by "hole drilling" and indentation tests combined and by inverse analysis, Mechanics Research Communications, 68, 18-24.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0093-6413, 10.1016/j.mechrescom.2015.02.003, M22.

Maier Giulio, Buljak Vladimir, Garbowski Tomasz, Cocchetti Giuseppe, Novati Giorgio (2014). Mechanical characterization of materials and diagnosis of structures by inverse analyses: some innovative procedures and applications, International Journal of Computational Methods, 11(3).
World Scientific Publ Co Pte Ltd, Singapore, ISSN: 0219-8762, 10.1142/S0219876213430020, M22.

Petrović Veljko M., Buljak Vladimir, Cornaggia Aram (2021). Osetljivost skorohodolevski viskoznog modela sinterovanja na promenu temperaturnog polje po uzorku u toku sinterovanja, FME Transactions, 49(3), 719-725.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fme2103719P, M22.

Buljak Vladimir, Pandey Shwetank, Balać Igor (2017). Kalibrisanje konstitutivnih modela korišćenjem instrumentalnog utiskivanja i stohastičke inverzne analize, FME Transactions, 45(1), 109-116.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet1701109B, M24.

Buljak Vladimir, Garbowski Tomasz (2014). Efficient methods for optimal space filling in model reduction techniques, Recent Advances in Computational Mechanics - Proceedings of the 20th International Conference on Com.
Taylor and Francis - Balkema, 10.1201/b16513-37, M13.

Aranđelović Nevena, Buljak Vladimir (2019). FEM ANALYSIS OF CORONARY STENT DEPLOYMENT, Proceeding of 7th International Congress of Serbian Society of Mechanics Sremski Karlovci, Serbia, June 24-26, 2019..
Beograd : Srpsko društvo za mehaniku, ISBN: 978-86-909973-7-4, M33.

Buljak Vladimir, Cocchetti Giuseppe, Cornaggia Aram, Maier Giulio, Novati Giorgio, Garbowski Tomasz (2015). Materials mechanical characterizations and structural diagnoses by inverse analyses, Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures.
Springer New York, 10.1007/978-1-4614-5589-9, M13.

Buljak Vladimir, Ranzi G. (2021). Constitutive Modeling of Engineering Materials: Theory, Computer Implementation, and Parameter Identification, Constitutive Modeling of Engineering Materials: Theory, Computer Implementation, and Parameter Ident.
Elsevier, 10.1016/B978-0-12-814696-5.00002-2.