Faculty of Mechanical Engineering

Srbislav B. Genić

Srbislav B. Genić, Ph.D., full professor
Department of Process and Environmental Protection Engineering
Office: 013
Email: sgenic@mas.bg.ac.rs
Phone: extension 360; direct 3302-360

Courses

Analysis and risk management in process industries
Higher course of mass transfer and equipment
Higher course of heat transfer operations and equipment
Economic analysis in process engineering
B.Sc. work
B.Sc. work
B.Sc. work
B.Sc. work
B.Sc. work
Fundamentals of risk engineering and fire safety
Selected topics on suppression of industrial risks, fire and explosions
Principles of modeling in process engineering
Heat exchangers
Heat transfer operations and equipment

Research area

process engineering

Education, qualifications

1989 - MSc Thesis - Faculty of Mechanical Engineering Belgrade 1993 - Profesional engineer title (Serbian Chamber of Commerce) 1994 - Magister of Science Thesis - Faculty of Mechanical Engineering Belgrade 1995 - Welding specialist SRPS C.T3.072 - Welding Institute Belgrade 2003 - PhD Thesis - Faculty of Mechanical Engineering Belgrade 2003 - Professional Engineer Licences 330, 332, 381, 430 - Serbian Chamber of Engineers 2005 - Course of Fire Protection Systems for Professional Engineer - Ministry of Interior of Serbia, Sector for Emergency Management 2005 - AQUIT Certified expert – VB.Net (AQUIT Project, Steinbeis University Berlin Certificate) 2005 - Stress Analysis Of Pipelines using CAESAR II – Faculty of Mechanical Engineering Belgrade and COADE 2005 - Basic training of university teachers - Faculty of Philosophy Belgrade 2009 - Accidents and Consequences Modeling (ESPRIT Project, Steinbeis University Berlin Certificate) 2011 - Court Expert appointed by the Serbian Ministry of Justice 2012 - Pipe Stress and Flexibility Analysis Using Caesar II Software, (Numikon Ltd) 2016 - License A for the preparation of the Final Design of Fire protection (Department for Emergency Situations of the MIA of Serbia) 2018 - Licenses B1, B4 and B6 for the designer and contractor for special fire protection systems (Department for Emergency Situations of the MIA of Serbia)

Publications, recognitions, awards

42 papers in SCI journals over 100 articles in journals and lectures at symposiums at home and abroad 8 university textbooks (one published in Romania) Award Belgrade Chamber of Commerce in 2014.

Membership in scientific and professional organizations

Serbian Chamber of Engineers Association of Mechanical and Electrical Engineers and Technicians of Serbia (SMEITS)

Bibliography

Papers in journals indexed in the SCI and SCIe lists

Jaćimović Branislav M., Genić Srbislav, Jacimović Nikola (2020). Application of modified Kalina cycle in biomass chp plants, International Journal of Energy Research, 44(11), 8754-8768.
Wiley, Hoboken, ISSN: 0363-907X, 10.1002/er.5570, M21a+.

Petrović Andrija, Jovanović Miloš Z., Genić Srbislav, Bugarić Uglješa, Delibasić Boris (2018). Evaluating performances of 1-D models to predict variable area supersonic gas ejector performances, Energy, 163, 270-289.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0360-5442, 10.1016/j.energy.2018.08.115, M21a+.

Genić Srbislav, Jaćimović Branislav M., Jarić Marko, Budimir Nikola (2013). Analysis of fouling factor in district heating heat exchangers with parallel helical tube coils, International Journal of Heat and Mass Transfer, 57(1), 9-15.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0017-9310, 10.1016/j.ijheatmasstransfer.2012.09.060, M21a+.

Genić Srbislav, Jaćimović Branislav M., Jarić Marko, Budimir Nikola, Dobrnjac Mirko M. (2012). Research on the shell-side thermal performances of heat exchangers with helical tube coils, International Journal of Heat and Mass Transfer, 55(15-16), 4295-4300.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0017-9310, 10.1016/j.ijheatmasstransfer.2012.03.074, M21a+.

Jaćimović Branislav M., Genić Srbislav, Stamenić Mirjana (2019). Reconsideration of enthalpy and entropy data and correlations for ammonia-water mixture up to 100 bar AND 535 degrees C, International Journal of Refrigeration-Revue Internationale Du Froid, 100, 83-92.
Elsevier Sci Ltd, Oxford, ISSN: 0140-7007, 10.1016/j.ijrefrig.2019.01.004, M21a.

Marković Sasa, Jaćimović Branislav M., Genić Srbislav, Mihailović Miloš, Milovančević Uroš, Otović Milena (2019). Air side pressure drop in plate finned tube heat exchangers, International Journal of Refrigeration-Revue Internationale Du Froid, 99, 24-36.
Elsevier Sci Ltd, Oxford, ISSN: 0140-7007, 10.1016/j.ijrefrig.2018.11.038, M21a.

Genić Srbislav, Jaćimović Branislav M., Petrović Andrija (2018). A novel method for combined entropy generation and economic optimization of counter-current and co-current heat exchangers, Applied Thermal Engineering, 136, 327-334.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1359-4311, 10.1016/j.applthermaleng.2018.03.026, M21a.

Jacimović Nikola, Genić Srbislav, Jaćimović Branislav M. (2015). Novel method for validation of experimental data for direct contact condensers with zero vapor outflow, Applied Thermal Engineering, 91, 1134-1140.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1359-4311, 10.1016/j.applthermaleng.2015.08.052, M21a.

Jaćimović Branislav M., Genić Srbislav, Budimir Nikola, Jarić Marko (2014). Techno-economic optimization of plant for raw ethanol production based on experimental data, International Journal of Heat and Mass Transfer, 79, 639-646.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0017-9310, 10.1016/j.ijheatmasstransfer.2014.07.085, M21a.

Genić Srbislav, Jaćimović Branislav M., Genić Vojislav (2012). Economic optimization of pipe diameter for complete turbulence, Energy and Buildings, 45, 335-338.
Elsevier Science Sa, Lausanne, ISSN: 0378-7788, 10.1016/j.enbuild.2011.10.054, M21a.

Genić Srbislav, Jaćimović Branislav M., Mandić Dragan, Petrović Dragan (2012). Experimental determination of fouling factor on plate heat exchangers in district heating system, Energy and Buildings, 50, 204-211.
Elsevier Science Sa, Lausanne, ISSN: 0378-7788, 10.1016/j.enbuild.2012.03.039, M21a.

Genić Srbislav, Jaćimović Branislav M., Vladić Ljubiša (2008). Heat transfer rate of direct-contact condensation on baffle trays, International Journal of Heat and Mass Transfer, 51(25-26), 5772-5776.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0017-9310, 10.1016/j.ijheatmasstransfer.2008.05.017, M21a.

Genić Srbislav, Jaćimović Branislav M., Janjić Bojan (2007). Experimental research of highly viscous fluid cooling in cross-flow to a tube bundle, International Journal of Heat and Mass Transfer, 50(7-8), 1288-1294.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0017-9310, 10.1016/j.ijheatmasstransfer.2006.09.004, M21a.

Genić Srbislav (2006). Direct-contact condensation heat transfer on downcommerless trays for steam-water system, International Journal of Heat and Mass Transfer, 49(7-8), 1225-1230.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0017-9310, 10.1016/j.ijheatmasstransfer.2005.10.003, M21a.

Milovančević Uroš, Genić Srbislav, Jaćimović Branislav M., Otović Milena (2024). Wet cooling of air on plate finned tube heat exchangers, INTERNATIONAL JOURNAL OF REFRIGERATION, 165, 133-144.
Elsevier, ISSN: 0140-7007, 10.1016/j.ijrefrig.2024.05.004, M21.

Mihailović Miloš, Milovančević Uroš, Genić Srbislav, Jaćimović Branislav M., Otović Milena, Kolendić Petar (2020). Air side heat transfer coefficient in plate finned tube heat exchangers, Experimental Heat Transfer, 33(4), 388-399.
Taylor & Francis Inc, Philadelphia, ISSN: 0891-6152, 10.1080/08916152.2019.1656298, M21.

Jaćimović Branislav M., Genić Srbislav (2018). Reconsideration of T-P-x-y data and correlations for ammonia water mixture for pressures up to 100 bar, Fluid Phase Equilibria, 463, 62-68.
Elsevier Science Bv, Amsterdam, ISSN: 0378-3812, 10.1016/j.fluid.2018.02.007, M21.

Radanov Branka B., Genić Srbislav, Jaćimović Branislav M. (2016). Heat Transfer Coefficient for Condensation of Steam on Freely Formed Falling Liquid Jets, Aiche Journal, 62(7), 2579-2584.
Wiley, Hoboken, ISSN: 0001-1541, 10.1002/aic.15233, M21.

Jaćimović Branislav M., Genić Srbislav, Jacimović Nikola B. (2012). Reboiler Separation Efficiencies for Binary Systems, Industrial & Engineering Chemistry Research, 51(16), 5793-5804.
Amer Chemical Soc, Washington, ISSN: 0888-5885, 10.1021/ie202193m, M21.

Jaćimović Branislav M., Genić Srbislav (2011). Tray Efficiency versus Stripping Factor, Industrial & Engineering Chemistry Research, 50(12), 7445-7451.
Amer Chemical Soc, Washington, ISSN: 0888-5885, 10.1021/ie101052f, M21.

Jaćimović Branislav M., Genić Srbislav (2011). Normalized Efficiency for Stagewise Operations, Industrial & Engineering Chemistry Research, 50(12), 7437-7444.
Amer Chemical Soc, Washington, ISSN: 0888-5885, 10.1021/ie2001583, M21.

Jaćimović Branislav M., Genić Srbislav, Đorđević Dimitrije R., Budimir Nikola, Jarić Marko (2011). Estimation of the number of trays for natural gas triethylene glycol dehydration column, Chemical Engineering Research & Design, 89(6A), 561-572.
Elsevier, Amsterdam, ISSN: 0263-8762, 10.1016/j.cherd.2010.08.012, M21.

Jaćimović Branislav M., Genić Srbislav, Latinović Boris R. (2006). Research on the air pressure drop in plate finned tube heat exchangers, International Journal of Refrigeration-Revue Internationale Du Froid, 29(7), 1138-1143.
Elsevier Sci Ltd, Oxford, ISSN: 0140-7007, 10.1016/j.ijrefrig.2006.02.003, M21.

Genić Srbislav, Jaćimović Branislav M., Latinović Boris R. (2006). Research on air pressure drop in helically-finned tube heat exchangers, Applied Thermal Engineering, 26(5-6), 478-485.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1359-4311, 10.1016/j.applthermaleng.2005.07.017, M21.

Milanović P, Jaćimović Branislav M., Genić Srbislav (2004). The influence of heat exchanger performances on the design of indirect geothermal heating system, Energy and Buildings, 36(1), 9-14.
Elsevier Science Sa, Lausanne, ISSN: 0378-7788, 10.1016/S0378-7788(03)00036-7, M21.

Jaćimović Branislav M., Genić Srbislav, Jacimović Nikola (2022). Influence of Flue Gas Pattern Flow in Boiler Radiant Section on Heat Transfer, Journal of Thermal Science and Engineering Applications, 14(2).
ASME, New York, ISSN: 1948-5085, 10.1115/1.4051369, M22.

Ivošević Miloš, Petrović Andrija, Jaćimović Branislav M., Genić Srbislav (2019). Thermal performances and their impact on design of bayonet-tube heat exchangers - single phase plug flow, Heat and Mass Transfer, 55(9), 2391-2407.
Springer, New York, ISSN: 0947-7411, 10.1007/s00231-019-02568-3, M22.

Jacimović Nikola, Genić Srbislav, Jaćimović Branislav M. (2019). Sizing of Packed Deaeration Columns, Chemical Engineering & Technology, 42(12), 2709-2716.
Wiley-V C H Verlag Gmbh, Weinheim, ISSN: 0930-7516, 10.1002/ceat.201800642, M22.

Milovančević Uroš, Jaćimović Branislav M., Genić Srbislav, El-Sagier Faraj, Otović Milena, Stevanović Snežana M. (2019). Thermoeconomic analysis of spiral heat exchanger with constant wall temperature, Thermal Science, 23(1), 401-410.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI170605150M, M22.

Otović Milena, Mihailović Miloš, Genić Srbislav, Jaćimović Branislav M., Milovančević Uroš, Marković Sasa (2018). Reconsideration of data and correlations for plate finned-tube heat exchangers, Heat and Mass Transfer, 54(10), 2987-2994.
Springer, New York, ISSN: 0947-7411, 10.1007/s00231-018-2328-0, M22.

Jaćimović Branislav M., Genić Srbislav, Lelea Dorin (2018). Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications, Heat Transfer Engineering, 39(20), 1794-1800.
Taylor & Francis Inc, Philadelphia, ISSN: 0145-7632, 10.1080/01457632.2017.1388949, M22.

Genić Srbislav, Jaćimović Branislav M., Milovančević Uroš, Ivošević Miloš, Otović Milena, Antić Milan I. (2018). Thermal performances of a "black box" heat exchanger in district heating system, Heat and Mass Transfer, 54(3), 867-873.
Springer, New York, ISSN: 0947-7411, 10.1007/s00231-017-2182-5, M22.

Jaćimović Branislav M., Genić Srbislav, Lelea Dorin (2018). Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications, Heat Transfer Engineering, 39(20), 1794-1800.
Taylor & Francis Inc, Philadelphia, ISSN: 0145-7632, 10.1080/01457632.2017.1388949, M22.

Jaćimović Branislav M., Genić Srbislav, Budimir Nikola, Jarić Marko (2017). Techno-economic evaluation of residue exhaustion in batch rectification ethanol production plant, Thermal Science, 21(6), 2971-2980.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI160601267J, M22.

Kolendić Petar, Genić Srbislav, Jaćimović Branislav M., Ćuprić Nenad Lj., Jakimov Sasa M., Radanov Branka B. (2015). Modeling of the working cycle of the pressure-powered pump, Thermal Science, 19(3), 1051-1058.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI131223021G, M22.

Budimir Nikola, Jarić Marko, Jaćimović Branislav M., Genić Srbislav, Jaćimović Nikola B. (2011). Rectified ethanol production cost analysis, Thermal Science, 15(2), 281-292.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI100914022B, M22.

Đorđević Dimitrije R., Jaćimović Branislav M., Genić Srbislav, Aranđelović Ivan, Kolendić Petar, Rajić Radenko S. (2011). A Simple Method for Simulation of Stationary and Non-stationary Operation of Trayed Distillation Column, Revista De Chimie, 62(3), 328-334.
Chiminform Data S A, Bucharest, ISSN: 0034-7752, M22.

Jaćimović Branislav M., Genić Srbislav (2008). Tray-to-tray method for estimation of the number of trays in gas-liquid columns in case of intensive entrainment, Chemical Engineering Research & Design, 86(5A), 427-434.
Inst Chemical Engineers, Rugby, ISSN: 0263-8762, 10.1016/j.cherd.2007.12.006, M22.

Jaćimović Branislav M., Genić Srbislav (2007). Number of trays in gas-liquid columns in case of intensive entrainment: Broadening of the Kremser equation, Chemical Engineering Research & Design, 85(A12), 1662-1669.
Elsevier, Amsterdam, ISSN: 0263-8762, 10.1016/S0263-8762(07)73210-0, M22.

Milanović P, Jaćimović Branislav M., Genić Srbislav (2006). Experimental measurement of fouling resistance in the heat exchanger of a geothermal heating system, Geothermics, 35(1), 79-86.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0375-6505, 10.1016/j.geothermics.2005.11.003, M22.

Jaćimović Branislav M., Genić Srbislav (2000). Froth porosity and clear liquid height in trayed columns, Chemical Engineering & Technology, 23(2), 171-176.
Wiley-V C H Verlag Gmbh, Weinheim, ISSN: 0930-7516, M22.

Papers in journals not indexed in the SCI and SCIe lists

Genić Srbislav, Aranđelović Ivan, Kolendić Petar, Jarić Marko, Budimir Nikola, Genić Vojislav (2011). Pregled eksplicitnih aproksimacija Kolbrukove jednačine za koeficijent trenja, FME Transactions, 39(2), 67-71.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, M51.

Genić Srbislav, Jaćimović Branislav M., Budimir Nikola, Jarić Marko (2009). Garancijska ispitivanja toplotnih performansi i pada pritiska razmejivača toplote, Termotehnika, 35(1), 81-86.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd i Društvo termičara Srbije, Beograd, ISSN: 0350-218X, M51.

Tanasić Nikola, Stamenić Mirjana, Genić Srbislav, Petrović Aleksandar, Milivojević M. (2017). Proračun posuda sa vazduhom za zaštitu cevovoda od hidrauličnog udara, Procesna tehnika, 29(2), 36-39.
Savez mašinskih i elektroinženjera i tehničara Srbije (SMEITS), ISSN: 2217-2319, M53.

Conference papers

Ivanović Milica, Aranđelović Ivan, Genić Srbislav, Simonović Aleksandar (2024). INERTNI GASOVI I AEROSOLI KAO ALTERNATIVNA SREDSTVA HALONIMA ZA GAŠENJE POŽARA, 37. Međunarodni kongres o procesnoj industriji.
Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), ISBN: 978-86-85535-18-5, M33.

Otović Milena, Genić Srbislav, Milovančević Uroš, Černicin Vladimir, Otović Srđan, Stevanović Snežana M. (2020). TESTING OF AIR HEATERS WITH PLATE FINNED TUBES WITH SPRAY COOLING, Zbornik 50. Međunarodnog kongresa o KGH.
Beograd: SMEITS, ISBN: 978-86-81505-99-1, M33.

Otović Milena, Milovančević Uroš, Genić Srbislav, Mitrović Nenad, Černicin Vladimir, Otović Srđan, Antić Milan I. (2020). TESTING OF THE INFLUENCE OF THE SPRAY COOLING SYSTEM ON THE AIR COOLER EFFICIENCY, Zbornik 51. Međunarodnog kongresa o KGH.
Beograd: SMEITS, ISBN: 978-86-85535-07-9, 10.24094/kghk.020.51.1.11, M33.

Milovančević Uroš, Genić Srbislav, Otović Milena, Stevanović Snežana M. (2016). PERFORMANCES INVESTIGATION OF FINNED TUBE AIR COOLER, Zbornik 47. Međunarodnog kongresa o KGH.
Beograd: SMEITS, ISBN: 978-86-81505-82-3, M33.

Ivanović Milica, Vesović Mitra, Stamenić Mirjana, Jovanović Radiša, Genić Srbislav (2024). NEURAL NETWORK MODEL FOR PREDICTING THE EFFICIENCY OF A STEAM BOILER USING NATURAL GAS AS FUEL, 2nd International Conference on Mathematical Modelling in Mechanics and Engineering ICME 2024.
ISBN: 978-86-80593-77-7, M34.

Gajić Branislav, Marković Saša, Genić Srbislav (2022). CO2 EMISSION REDUCTION BY USING CORN AS A RAW MATERIAL IN REFINED ALCOHOL PRODUCTION, Programme & Book of Abstracts of IEEP 2022.
M63.

Genić Srbislav, Jaćimović Branislav, Stanković Vladislav, Gajić Branislav (2022). Značajno povećanje indeksa troškova procesnih postrojenja i opreme tokom 2021., Zbornik radova 35. Međunarodnog kongresa o procesnoj industriji, Procesing 2022.
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), ISBN: 978-86-85535-12-3, M63.

Genić Srbislav, Jaćimović Branislav, Budimir Nikola, Jarić Marko, Ivošević Miloš, Stamenić Mirjana (2015). Poboljšanje rada sistema procesnog i skladišnog grejanja u fabrici za proizvodnju margarina, 28. Međunarodni kongres o procesnoj industriji Procesing 15.
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije, ISBN: 978-86-81505-77-9, M63.

Aranđelović Ivan, Genić Srbislav, Rajić Radenko, Đinović Ilija (2019). Određivanje protoka vode na hidrantskom priključku primenom kalibrisanih mlaznica, 32. Međunarodni kongres o procesnoj industriji PROCESING '19, Beograd 2019.
ISBN: 978-86-81505-94-6.

Aranđelović Ivan, Genić Srbislav, Rajić Radenko (2018). Određivanje rasporeda aparata za gašenje požara u neindustrijskim objektima, Međunarodna naučna konferencija Bezbednosni inženjering; Zaštita od požara i eksplozije, Novi Sad 2018, 209-216..
Visoka tehnička škola strukovnih studija Novi Sad, ISBN: 978-86-6211-114-2.

Stamenić Mirjana, Jaćimović Branislav M., Genić Srbislav, Jankes Goran, Simonović Tomislav, Tanasić Nikola (2014). Results of Experimental Research on Parameters that Determine Stable Operating Limits of Ceramic Burner with Packed Bed of Uniform Spheres for Combustion of Low Calorific Gaseous Fuels, 3rd International Symposium on Environment Friendly Energies and Applications, EFEA 2014.
Institute of Electrical and Electronics Engineers Inc., 10.1109/EFEA.2014.7059975.

Books

Banjac Miloš, Kulić F., Genić Srbislav, Stamenić Mirjana, Čantrak Đorđe, Ilić Dejan, Janković Novica, Milivojević Aleksandar, Otović Milena, Zlatanović Ivan, Gvozdenac Urošević B., Urošević D., Adžić Vuk, Josipović S., Jošić P., Galić R., Vasilev M., Petrović B., Kovačević S. (2025). Priručnik za obuku energetskih savetnika.
Beograd : Mašinski fakultet Univerziteta, ISBN: 978-86-6060-213-0.

Mentoring of defended doctoral dissertations since 2013

Process performances of heat exchanger with finned tubes in in-line tube arrangement, Saša Marković, 2022.

The preformances of air cooled heat exchangers with water spraying, Milena Otović, 2022.

Process performances of packed column for water degassing under vacuum, Miloš Ivošević, 2020.

Heat performances and pressure drop of helically-finned tube heat exchangers with triangular tube arrangement, Miloš Mihailović, 2020.

Process performances of supersonic gas ejector with variable area convergent-divergent nozzle, Andrija Petrović, 2020.

Uticaj kondenzacije vlage na performanse hladnjaka vazduha sa orebrenim cevima, Uroš Milovančević, 2016.

Research on heat transfer parameters of finned-tube heaters and coolers, Petar Kolendić, 2015.

Procesni fenomeni pri degazaciji vode u kontaktnim kondezatorima sa nasutom ispunom, Nikola Jaćimović, 2014.