Универзитет у Београду

Lukić Nebojša, Ivanov Toni, Svorcan Jelena, Simonović Aleksandar (2024). Numerical Investigation and Optimization of a Morphing Airfoil Designed for Lower Reynolds Number, Aerospace, 11(4).
MDPI, ISSN: 2226-4310, 10.3390/aerospace11040252, M21.

Posteljnik Zorana, Stupar Slobodan, Svorcan Jelena, Peković Ognjen, Ivanov Toni (2016). Multi-objective design optimization strategies for small-scale vertical-axis wind turbines, Structural and Multidisciplinary Optimization, 53(2), 277-290.
Springer, New York, ISSN: 1615-147X, 10.1007/s00158-015-1329-6, M21.

Svorcan Jelena, Stupar Slobodan, Trivković Srđan, Petrašinović Nikola, Ivanov Toni (2014). Active boundary layer control in linear cascades using CFD and artificial neural networks, Aerospace Science and Technology, 39, 243-249.
Elsevier France-Editions Scientifiques Medicales Elsevier, Issy-Les-Moulineaux, ISSN: 1270-9638, 10.1016/j.ast.2014.09.010, M21.

Pajcin Miroslav P., Simonović Aleksandar, Ivanov Toni, Komarov Dragan, Stupar Slobodan (2017). Numerical analysis of a hypersonic turbulent and laminar flow using a commercial cfd solver, Thermal Science, 21, S795-S807.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI160518198P, M22.

Ivanov Toni, Simonović Aleksandar, Petrović Nebojša, Fotev Vasko, Kostić Ivan (2017). Influence of selected turbulence model on the optimization of a class-shape transformation parameterized airfoil, Thermal Science, 21, S737-S744.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI160209194I, M22.

Spasić Dragoljub M., Stupar Slobodan, Simonović Aleksandar, Trifković Dragan, Ivanov Toni (2014). The failure analysis of the star-separator of an aircraft cannon, Engineering Failure Analysis, 42, 74-86.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2014.03.022, M22.

Svorcan Jelena, Andrić Jelena, Čantrak Đorđe, Ivanov Toni (2022). Special Collection on advanced practices in aerospace and energy engineering, Advances in Mechanical Engineering, 14(10), 1-3.
ISSN: 1687-8132, 10.1177/16878132221125578, M23.

Kovacević Aleksandar, Svorcan Jelena, Hasan Mohammad Sakib, Ivanov Toni, Jovanović Miroslav (2021). Optimal propeller blade design, computation, manufacturing and experimental testing, Aircraft Engineering and Aerospace Technology, 93(8), 1323-1332.
Emerald Group Publishing Ltd, Bingley, ISSN: 1748-8842, 10.1108/AEAT-03-2021-0091, M23.

Hasan Mohammad Sakib, Ivanov Toni, Vorkapić Miloš, Simonović Aleksandar, Daou David, Kovacević Aleksandar, Milovanović Aleksa (2020). Impact of Aging Effect and Heat Treatment on the Tensile Properties of PLA (Poly Lactic Acid) Printed Parts, Materiale Plastice, 57(3), 147-159.
Revista Chimie Srl, Bucuresti, ISSN: 0025-5289, 10.37358/MP.20.3.5389, M23.

Baltić Marija, Svorcan Jelena, Perić Bojan, Vorkapić Miloš, Ivanov Toni, Peković Ognjen (2019). Comparative numerical and experimental investigation of static and dynamic characteristics of composite plates, Journal of Mechanical Science and Technology, 33(6), 2597-2603.
Korean Soc Mechanical Engineers, Seoul, ISSN: 1738-494X, 10.1007/s12206-019-0507-7, M23.

Vorkapić Miloš, Živojinović Danijela, Kreculj Dragan, Ivanov Toni, Baltić Marija, Simonović Aleksandar (2023). Application of Additive Technology and Reverse Engineering in the Realization of Damaged Obsolete Parts, FME Transactions, 51(1), 31-38.
Faculty of Mechanical Engineering, Belgrade, 10.5937/fme2301031V, M24.

Svorcan Jelena, Trivković Zorana, Ivanov Toni, Baltić Marija, Peković Ognjen (2019). Višekriterijumske ograničene optimizacije kompozitnih lopatica vetroturbina sa vertikalnom osom obrtanja bazirane na konačno-elementnoj analizi i optimizaciji brojem čestica, FME Transactions, 47(4), 887-893.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet1904887S, M24.

Svorcan Jelena, Peković Ognjen, Ivanov Toni (2018). Estimation of wind turbine blade aerodynamic performances computed using different numerical approaches, Theoretical and Applied Mechanics, 45(1), 53-65.
Beograd : Srpsko društvo za mehaniku, ISSN: 1450-5584, 10.2298/TAM171130004S, M24.

Ivanov Toni, Simonović Aleksandar, Svorcan Jelena, Peković Ognjen (2017). Optimizacija vetroturbine sa vertikalnom osom upotrebom genetskih algoritama i CST parametrizacijom aeroprofila, FME Transactions, 45(1), 26-31.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet1701026I, M24.

Vorkapić Miloš, Ivanov Toni, Baltić Marija, Kreculj Dragan D., Tanović Dragoljub, Kovačević Aleksandar M. (2020). Upotreba 3D štampe u analizi dizajna realizovanog proizvoda - slučaj - kutija malogabaritnog transmitera pritiska, Tehnika, 75(2), 179-186.
Savez inženjera i tehničara Srbije, Beograd, ISSN: 0040-2176, 10.5937/tehnika2002179V, M51.

Popović Lazar S., Paunović Lazar D., Đilas Veljko S., Milutinović Aleksandar M., Ivanov Toni, Kostić Ivan (2020). Aerodinamički dizajn bespilotne letelice u više faza, Scientific Technical Review, 70(2), 9-16.
Vojnotehnički institut, Beograd, ISSN: 1820-0206, 10.5937/str2002009P, M51.

Ivanov Toni, Simonović Aleksandar, Stupar Slobodan, Petrović Nebojša, Svorcan Jelena (2016). Aerodinamička optimizacija parametrizovanog aeroprofila primenom genetskog algoritma, Energija, ekonomija, ekologija - Energetika 2016, XVIII(3-4), 313-318.
Savez energetičara, ISSN: 0354-8651, M51.

Ivanov Toni, Simonović Aleksandar, Komarov Dragan, Stupar Slobodan, Petrović Nebojša (2014). Metode određivanja aerodinamičke buke kod vetroturbina, Energija, ekonomija, ekologija.
Savez energetičara, ISSN: 0354-8651, M51.

Ivanov Toni, Ivanović Milica, Zubić Miloš, Simonović Aleksandar (2023). Izazovi i prilike vodonika kao održivog vazduhoplovnog goriva budućnosti, Procesna tehnika, 35(1), 30-33.
ISSN: 2217-2319, 10.24094/ptk.023.039, M53.

Baltić Marija, Svorcan Jelena, Peković Ognjen, Ivanov Toni (2020). Comparative Numerical and Experimental Modal Analysis of Aluminum and Composite Plates, Computational and Experimental Approaches in Materials Science and Engineering, Cnntech 2019, 90, 61-75.
Springer International Publishing Ag, Cham, ISSN: 2367-3370, 10.1007/978-3-030-30853-7_4, M14.

Svorcan Jelena, Ivanov Toni, Peković Ognjen, Simonović Aleksandar (2024). Computing aerodynamic damping in roll and pitch of a supersonic finner model, 11th International Scientific Conference on Defensive Technologies - OTEH 2024.
Belgrade : Military Technical Institute, ISBN: 978-86-81123-94-2, 10.5937/OTEH24005S, M33.

Mirkov Nikola, Peković Ognjen, Ivanov Toni, Kovačević Aleksandar, Simonović Aleksandar (2023). Implicit LES Using New Slope Limiters, Novel Techniques in Maintenance, Repair, and Overhaul. Proceedings of the International Symposium on Aviation Technology, MRO, and Operations 2022.
ISBN: 978-3-031-42040-5, M33.

Ivanović Milica, Ivanov Toni, Kovačević Aleksandar (2022). Numerical investigation of the influence of geometry on the thermal properties of a heat pipe, 1st International Conference on Mathematical Modelling in Mechanics and Engineering, Mathematical Institute SANU.
ISBN: 978-86-6060-127-0, M33.

Svorcan Jelena, Hasan Mohammad Sakib, Kovačević A., Ivanov Toni (2021). Design of HALE Propeller through Multi-objective Optimization, AIAA Propulsion and Energy Forum, 2021.
American Institute of Aeronautics and Astronautics Inc, AIAA, 10.2514/6.2021-3730, M33.

Svorcan Jelena, Kovačević Aleksandar, Ivanov Toni, Jovanović Miroslav (2021). Numerical investigation of Reynolds number effects on rotor aerodynamic performances in hover, Proceedings / The 8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia, June 28-30, 2021.
Belgrade : Serbian Society of Mechanics, ISBN: 978-86-909973-8-1, M33.

Peković Ognjen, Svorcan Jelena, Simonović Aleksandar, Ivanov Toni, Tanović Dragoljub (2020). Optimizacija koncentratora vazduha vetroturbina sa vertikalnom osom obrtanja, Energija, ekonomija, ekologija - Monografija XXXV Međunarodnog savetovanja ENERGETIKA 2020 - Zbornik radova.
Beograd : Savez energetičara, ISBN: 978-86-86199-02-7, M33.

Svorcan Jelena, Peković Ognjen, Ivanov Toni, Vorkapić Miloš (2020). Numerical evaluation of aerodynamic performances of vertical-axis wind turbine rotor with flow concentrator, 8th International Conference on Renewable Electrical Power Sources.
Beograd : SMEITS, ISBN: 978-86-85535-06-2, M33.

Svorcan Jelena, Hasan Mohammad Sakib, Kovačević Aleksandar, Ivanov Toni (2020). Design of the optimal airfoil for a blade of a small-scale multi-rotor VTOL UAV, International Symposium on Electric Aviation and Autonomous Systems ISEAS 2020.
SARES, ISBN: 978-605-80140-5-3, M33.

Hasan Sakib Mohammad, Ivanov Toni, Tanović Dragoljub, Simonović Aleksandar, Vorkapić Miloš (2020). Dimensional accuracy and experimental investigation on tensile behavior of various 3D printed materials, 9th International Scientific Conference on Defensive Technologies, OTEH 2020, October 15-16, Belgrade, Serbia.
The Military Technical Institute, Belgrade, Serbia, ISBN: 978-86-81123-83-6, M33.

Simonović Aleksandar, Kovačević Aleksandar, Ivanov Toni, Vorkapić Miloš (2020). Wind turbine beyond 20 MW – Technology perspective, 8th International Conference on Renewable Electrical Power Sources (8. Međunarodna konferencija o obnovljivim izvorima električne energije), ICREPS 2020, October 16, Belgrade, Serbia.
Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd, ISBN: 978-86-85535-06-2, M33.

Svorcan Jelena, Baltić Marija, Ivanov Toni, Peković Ognjen, Milić Milica (2019). Numerical evaluation of aerodynamic loads and performances of vertical-axis wind turbine rotor, Proceedings / The 7th International Congress of Serbian Society of Mechanics Sremski Karlovci, June 24-26, 2019.
Belgrade : Serbian Society of Mechanics, ISBN: 978-86-909973-7-4, M33.

Svorcan Jelena, Trivković Zorana, Baltić Marija, Peković Ognjen, Ivanov Toni (2019). Multi-objective structural optimization of laminate vertical-axis wind turbine blades, Proceedings of GSRD International Conference.
GLOBAL Society for Research and Development, ISBN: 978-93-88786-54-6, M33.

Perić B., Simonović Aleksandar, Ivanov Toni, Stupar Slobodan, Vorkapić Miloš, Peković Ognjen, Svorcan Jelena (2018). Design and testing characteristics of thin stainless steel diaphragms, Procedia Structural Integrity - ECF22 - Loading and environmental effects on structural integrity, 13, 2196-2201.
Elsevier Science Bv, Amsterdam, ISSN: 2452-3216, 10.1016/j.prostr.2018.12.141, M33.

Svorcan Jelena, Peković Ognjen, Ivanov Toni, Baltić Marija (2018). Computational analysis of propeller slipstream aerodynamic effects, Proceedings / 8th International Scientific Conference on Defensive Technologies OTEH 2018.
Belgrade : Military Technical Institute - VTI, ISBN: 978-8681123-88-1, M33.

Ivanov Toni, Fotev Vasko, Petrović Nebojša, Svorcan Jelena, Peković Ognjen (2018). Optimization of BLDC motor/propeller matching in the design of small UAVs, Proceedings / 8th International Scientific Conference on Defensive Technologies OTEH 2018.
Belgrade : Military Technical Institute - VTI, ISBN: 978-8681123-88-1, M33.

Hasan Mohammad Sakib, Svorcan Jelena, Kostić Ivan, Simonović Aleksandar, Kostić Srđan, Ivanov Toni (2018). Preliminary aerodynamic performance estimation of HALE UAV wings, Proceedings / 8th International Scientific Conference on Defensive Technologies OTEH 2018.
Belgrade : Military Technical Institute - VTI, ISBN: 978-8681123-88-1, M33.

Perić Bojan, Simonović Aleksandar, Ivanov Toni, Stupar Slobodan, Vorkapić Miloš, Svorcan Jelena, Peković Ognjen (2018). Numerical analysis of stainless steel diaphragm for low pressure measurement, Proceedings of International Conference on Innovative Technologies IN-TECH 2018, 5-7. Septembar, 2018., Zagreb, Croatia.
Faculty of Engineering, University of Rijeka, ISSN: 0184-9069, M33.

Svorcan Jelena, Trivković Zorana, Ivanov Toni (2017). Computational analysis of horizontal-axis wind turbine by different RANS turbulence models, Proceedings / 6th International Congress of Serbian Society of Mechanics Mountain Tara, Serbia, June 19-21, 2017.
Belgrade : Serbian Society of Mechanics, ISBN: 978-86-909973-6-7, M33.

Ivanov Toni, Fotev Vasko, Petrović Nebojša, Trivković Zorana, Komarov Dragan (2016). Aeroacoustic Analysis of a Jet Nozzle, 7th International Scientific Conference od Defensive Technologies - OTEH 2016 - Proceedings.
Military Technical Institute, Srbija, ISSN: 978-86-81123-82-9, M33.

Peković Ognjen, Stupar Slobodan, Simonović Aleksandar, Ivanov Toni (2016). ISOGEOMETRIC ANALYSIS OF FREE VIBRATION OF ELLIPTICAL LAMINATED COMPOSITE PLATES USING THIRD ORDER SHEAR DEFORMATION THEORY, 7th International Scientific Conference on Defensive Technologies, OTEH 2016.
Military Technical Institute, ISBN: 978-8681123-88-1, M33.

Komarov Dragan, Svorcan Jelena, Isaković Jovan, Bengin Aleksandar, Ivanov Toni (2014). Numerical and experimental assessment of supersonic turbulent flow around a finned ogive cylinder, 6th International scientific conference on defensive technologies OTEH 2014.
Belgrade : Military Technical Institute - VTI, ISBN: 978-86-81123-71-3, M33.

Svorcan Jelena, Lukić Nebojša, Ivanov Toni, Simonović Aleksandar (2024). Design and flow simulation of a morphing airfoil, 2nd International Conference on Mathematical Modelling in Mechanics and Engineering ICME 2024.
Belgrade : MI SANU, ISBN: 978-86-80593-77-7, M34.

Ivanović Milica, Ivanov Toni, Simonović Aleksandar, Baltić Marija (2024). INTEGRATION OF LOOP HEAT PIPE ANTI-ICING SYSTEM IN THE AIRFOIL LEADING EDGE, International Conference of Experimental and Numerical Investigations and New Technologies – CNN tech.
ISBN: 978-86-6060-191-1, M34.

Svorcan Jelena, Ivanov Toni, Simonović Aleksandar (2023). Improving airfoil performance by designed blowing, 9th International Congress of the Serbian Society of Mechanics (ICSSM).
Српско друштво за механику, ISBN: 978-86-909973-9-8, M34.

Baltić Marija, Vorkapić Miloš, Simonović Aleksandar, Ivanov Toni, Tanović Dragoljub (2023). Assembling biomaterial specimens in a mould made of thermoplastic polymer: 3-point bending test, Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2023.
Belgrade : Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-155-3, M34.

Kovačević Aleksandar, Svorcan Jelena, Ivanov Toni (2022). Modeling, simulation and control of propeller driven seesaw system with asymmetric geometry using PID controller, Booklet of Abstracts - 1st International Conference on Mathematical Modelling in Mechanics and Engineering.
University of Belgrade, Faculty of Mechanical Engineering, ISBN: 978-86-6060-127-0, M34.

Ivanović Milica, Vorkapić Miloš, Simonović Aleksandar, Ivanov Toni, Stamenković Igor (2022). Influence of wall layer number around brass inserts in 3D printed specimens subjected to axial pull-out force, Workshop Programme and the Book of Abstracts - 2nd International Workshop on Structural Integrity of Additively Manufactured Materials – SIAMM22, 4th - 5th February 2022, Brno, Czech Republic.
SIRAMM H2020-WIDESPREAD-2018-03 Project No. 857124, Horizon 2020, M34.

Vorkapić Miloš, Baltić Marija, Ivanov Toni, Simonović Aleksandar (2022). The significance of 3D printing in textile-polymer composite structures realization for special purpose, Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2022, 05 – 08 July 2022, Zlatibor, Serbia.
Belgrade : Innovation Center of Faculty of Mechanical Engineering, M34.

Kovačević Aleksandar, Svorcan Jelena, Ivanov Toni (2021). Production process of composite propeller for multirotor UAV, The Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH.
Belgrade : Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-077-8, M34.

Svorcan Jelena, Peković Ognjen, Ivanov Toni, Baltić Marija, Simonović Aleksandar (2021). The effects of wind speed and turbulence model on wave formation in open systems, Abstract Book - 6th IAHR Europe Congress.
International Association for Hydro-Environment Engineering and Research (IAHR), ISBN: 978-83-66847-01-9, M34.

Ilić Stefan, Vorkapić Miloš, Ivanov Toni, Svorcan Jelena (2021). The use of 3D printing for studying the influence of ionizing radiation on electronic components, Program and the Book of Abstracts - International Conference East Europe Conference on Additively Manufactured Materials – EECAM21, 2nd-4th September 2021, Belgrade, Serbia.
SIRAMM project - H2020-WIDESPREAD-2018-03 Project No. 857124, Horizon 2020, M34.

Hasan Sakib Mohammad, Ivanov Toni, Vorkapić Miloš (2021). Improvement of mechanical characteristics of PLA by applying remelting process, Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2021, 29/06-02/07 2021, Zlatibor, Serbia.
Belgrade : Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-077-8, M34.

Baltić Marija, Svorcan Jelena, Ivanov Toni (2020). Numerical analysis of screw joint turn table and chassis of low-floor articulated bus IK218N, The Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH.
Belgrade : Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-042-6, M34.

Milošević Miloš, Trajković Isaak, Ivanov Toni, Popović Mihajlo, Mitrović Nenad, Milovanović Aleksa, Jovanović-Saković Jelena (2020). Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC, The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020.
Belgrade : Innovation Center of Faculty of Mechanical Engineering, ISBN: 978‐86‐6060‐042‐6, M34.

Baltić Marija, Svorcan Jelena, Peković Ognjen, Ivanov Toni (2019). Numerical and experimental modal analysis of aluminium and composite plates, The Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH.
Belgrade : Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-009-9, M34.

Vorkapić Miloš, Ivanov Toni, Baltić Marija, Živojinović Danijela (2022). Značaj komponenti 3D štampača na ukupan kvalitet izrade modela, Zbornik radova sa konferencije JUSK - 2022, Beograd, Srbija.
Beograd : JUSK - Jedinstveno Udruženje Srbije za Kvalitet, ISBN: 978-86-89157-20-8, M63.

Kovačević Aleksandar, Ivanov Toni, Simonović Aleksandar, Vorkapić Miloš (2022). Povećanje preciznosti izrade 3D štampanih delova primenom iterativne metode, Zbornik radova - 42. JUPITER konferencija / Proceedings - 42nd JUPITER Conference.
Uniiverzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-055-6, M63.

Vorkapić Miloš, Stajčić Aleksandar, Mladenović Ivana, Ivanov Toni (2021). Primer realizacije uzorka pomoću 3D štampe i analiza problema u kvalitetu, Zbornik radova JUSK ICQ - XVII Međunarodna konvencija o kvalitetu 2021, 09-11/06/2021, Beograd, Srbija.
Beograd : JUSK - Jedinstveno Udruženje Srbije za Kvalitet / Belgrade : UASQ - United Association of Serbia for Quality, ISBN: 978-86-89157-16-1, M63.

Hasan Sakib Mohammad, Vorkapić Miloš, Ivanov Toni, Kovačević Aleksandar (2020). Predikcija brzine na 3D štampaču primenom veštačkih neuronskih mreža, Zbornik radova - 42. JUPITER konferencija / Proceedings - 42nd JUPITER Conference.
Uniiverzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-055-6, M63.

Vorkapić Miloš, Ivanov Toni, Alsabri Anwer, Simonović Aleksandar (2018). Predikcija brzine vetra na teritoriji Libije primenom veštačkih neuronskih mreža, Zbornik radova - 41. JUPITER konferencija / Proceedings - 41nd JUPITER Conference.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-978-6, M63.

Hasan Sakib Mohammad, Ivanov Toni, Simonović Aleksandar, Baltić Marija, Svorcan Jelena (2018). Eksperimentalno ispitivanje 3D štampanih delova primenom digitalne korelacije slika, 41. JUPITER konferencija.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-978-6, M63.

Spasić Dragoljub, Ivanov Toni, Komarov Dragan, Stupar Slobodan (2014). Analiza otkaza zvezdastog separatora avionskog topa, Zbornik radova - 39. JUPITER konferencija / Proceedings - 39nd JUPITER Conference (26. CAD/CAM simpozijum).
Uniiverzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-838-3, M63.

Davidović Nikola, Miloš Predrag, Kolarević Nenad, Ivanov Toni, Jojić Branislav (2021). Study of innovative subsonic ramjet, Lecture Notes in Networks and Systems, 153, 413-431.
Springer, ISSN: 2367-3370, 10.1007/978-3-030-58362-0_24, M14.

Vorkapić Miloš, Ivanov Toni (2022). Algorithm for Applying 3D Printing in Prototype Realization in Accordance with Circular Production and the 6R Strategy: Case - Enclosure for Industrial Temperature Transmitter, Experimental Research and Numerical Simulation in Applied Sciences. Proceedings of the International Conference of Experimental and Numerical Investigations and New Technologies, CNNTech 2022. Lecture Notes in Networks and Systems, 564.
Springer, 10.1007/978-3-031-19499-3_3.

Vorkapić Miloš, Simonović Aleksandar, Ivanov Toni (2021). Algorithm for applying 3d printing in prototype realization – case: Enclosure for an industrial pressure transmitter, Lecture Notes in Networks and Systems, 153, 112-129.
Springer, ISSN: 2367-3370, 10.1007/978-3-030-58362-0_8.

Ivanov Toni, Peković Ognjen (2021). Design and analysis of an optimal electric propulsion system propeller, Lecture Notes in Networks and Systems, 153, 147-166.
Springer, ISSN: 2367-3370, 10.1007/978-3-030-58362-0_10.